The Kruger Director’s Chair

The Kruger Director’s Chair is a unique version of the classic Director’s Chair. All components are hand turned and measured by the expert eye of our master craftsmen. Solid brass hinges compliment the handcrafted Zambezi Teak.

The result is utility chair of rare beauty, elegance and comfort that sets it apart from other chairs of the same genre.

Recommended weight limit 110kg (220lb). Please do not rock back and forth on any chair.

From R4370

Maintenance:

Lacquer

To protect your lacquered finish please place your table away from direct sunlight. Apply a good furniture wax or polish, initially twice a month, thereafter once a month. Apply sufficient to thinly cover the surface. As it dries (becomes dull) buff with a clean cloth until a beautiful sheen is achieved. Between waxings, keep the finish clean with a soft cloth or duster, and buff without wax.

Oil

Your oiled Kruger Director’s Chair receives two applications of The Furniture Oil prior to delivery. Our outlets carry stock, should you require it. We recommend you re-apply when the finish looks faded or dry. The recommended application procedure is as follows:

• Wipe surface down with a clean cotton cloth lightly moistened with mineral turpentine. (Ensure that all surfaces are completely dry and clean before proceeding with the next step)
• Use a clean cotton cloth or soft bristled brush dipped in the oil and apply in light, short strokes, ensuring thorough and even distribution of the oil.
• Leave the oil on the furniture for at least 1 to 2 hours (but not more than 24 hours), to allow absorption into the wood.
• Use a clean cotton cloth and wipe off all excess liquid to leave a natural smooth finish.
• Allow to dry for approximately 24 hours.

If a wet glass or similar is left on the surface it may leave a watermark. In this case please wipe the water off as soon as possible, and if necessary apply some more Satinwood 28 base. If the mark is still slightly visible you can rub with a little baking soda mixed with an equal part of water, wipe off with a damp cloth and re-apply the oil.